|
Post by phil on Aug 24, 2015 20:39:56 GMT -5
Hi all. Anyone have any extra 1 inch bore, 3 inch diameter stamped flanges they don't need? I've tried searching the net, Covington, Kingsley, Diamond pacific, Michigan lapidary Supply, highland park, etc and have come up blank. I'm rebuilding an old Raytech cabbing unit for a friend, but 5 of the flanges are missing along with all of the spacers. Spacers I can make from PVC, but the flanges to keep the wheels from wobbling I still need. Tried some 1 inch bore steel washers, but they aren't "flat" enough to keep the wheels spinning true. Any help out there? Thanks! Phil
|
|
|
Post by jakesrocks on Aug 24, 2015 21:38:52 GMT -5
Dang Phil. Last time I looked for flange washers, they were all over ebay. Can't find anything tonight. You might look for precision ground flat washers.
|
|
bsky4463
fully equipped rock polisher
Member since September 2013
Posts: 1,696
|
Post by bsky4463 on Aug 24, 2015 22:05:57 GMT -5
|
|
|
Post by phil on Aug 24, 2015 22:55:13 GMT -5
precision ground flat washers? will try. Thanks
Cigarbox flanges are machined and for saw blades. I'm after stamped flanges that hold grinding and polishing wheels in perfect position.
Thanks
|
|
vwfence
has rocks in the head
Member since January 2013
Posts: 557
|
Post by vwfence on Sept 4, 2015 8:15:57 GMT -5
Phil , Im not sure what sizes they have , but tractor supply carries some stamped flanges . I will try and check today when i go to work and see what we have.
|
|
|
Post by phil on Sept 4, 2015 14:53:50 GMT -5
Thanks! I finally found some stamped bushings that worked, but I'm sure the info if you find them will come in handy for lots of folks....
|
|
vwfence
has rocks in the head
Member since January 2013
Posts: 557
|
Post by vwfence on Sept 6, 2015 21:37:35 GMT -5
Tractor Supply carries a lot of different stamped flanges as well as several sizes of sealed bearings and pillow blocks .
|
|
|
Post by phil on Sept 7, 2015 19:55:52 GMT -5
thanks!
|
|