sophia13
spending too much on rocks
RIP Jason Strickland, AKA sophia13
Member since March 2018
Posts: 327
|
Post by sophia13 on Mar 7, 2019 16:45:18 GMT -5
Updated post.....Found a replacement arbor from SFJS no luck anywhere else.....but cant get screws loose to remove arbor....they seem frozen and start to strip when bear down on.......any tips? Thanks
|
|
|
Post by manofglass on Mar 7, 2019 16:47:46 GMT -5
Post photos to start with
|
|
sophia13
spending too much on rocks
RIP Jason Strickland, AKA sophia13
Member since March 2018
Posts: 327
|
Post by sophia13 on Mar 7, 2019 17:01:53 GMT -5
Post photos to start with Confirmed worn part and found replacement but can't get old one off thank you
|
|
|
Post by johnjsgems on Mar 8, 2019 11:38:45 GMT -5
Try "Blaster" and let it soak. Then tap screwdriver with hammer. Then maybe. If saw was used with water must be a rust issue. Heating screws may help too. Then again, if it is bolts and nuts cut the old ones off.
|
|
sophia13
spending too much on rocks
RIP Jason Strickland, AKA sophia13
Member since March 2018
Posts: 327
|
Post by sophia13 on Mar 10, 2019 9:33:12 GMT -5
Try "Blaster" and let it soak. Then tap screwdriver with hammer. Then maybe. If saw was used with water must be a rust issue. Heating screws may help too. Then again, if it is bolts and nuts cut the old ones off. PB Blaster overnight worked. It's off to be refurbished on Monday.
|
|