|
Post by josephfrench369 on Jan 20, 2021 13:41:39 GMT -5
Hi guys my name is Joseph. I am trying to figure out how to change the blade on my 10 inch lapidary rock saw. Its old and The tag on the front of it says star diamond industries inc 22 6 0 8 Avalon boulevard Wilmington CA 90745 model number t-10
|
|
|
Post by jasoninsd on Jan 20, 2021 16:00:02 GMT -5
|
|
hummingbirdstones2
fully equipped rock polisher
Vince A., 1958-2023
Member since August 2018
Posts: 1,461
|
Post by hummingbirdstones2 on Jan 20, 2021 21:43:24 GMT -5
Welcome, Joseph.
We have a 10" Star that was sold by Sears. It has four screws going down through the saw table. Remove them and lift the table off the reservoir to change the blade if yours is the same design.
Here's a link to a thread here on the RTH about a Star saw with a different design.
If yours has the arbor under the table it probably has the four screws through the table.
|
|
|
Post by TheRock on Mar 2, 2021 9:17:46 GMT -5
Welcome to RTH Forum from S/W Michigan! ~Duke
|
|