stilllearning
off to a rocking start
Member since May 2021
Posts: 2
|
Post by stilllearning on May 13, 2021 6:19:21 GMT -5
I got a new CR2 double tumbler and one of the rollers isn't turning smoothly, it making my barrels vibrate up and down a little bit. One roller is OK but don't know is if it's bent very slightly or the bearings at one end is out . But I'm newish to tumbling only been doing it with a single barrel machine and decided to get a double barrel one. I just don't no how much movement machines can take I want my machine to last and don't want to end up with a problem later down the line .I wonder if I should send it back as I can. Iv phoned suppliers he says there nothing to worry about as it's guaranteed for a year . But don't know if he's just saying that then bearings go and he says it's wear and tear. Please could someone give me advice ,as I don't have the money to waste I had to use my savings to buy this
|
|
Fossilman
Cave Dweller
Member since January 2009
Posts: 20,680
|
Post by Fossilman on May 13, 2021 9:34:46 GMT -5
Hi and welcome... Please post this on the Rock Tumbling section, more people go to that section, than here.... They will fix you right up....
|
|
stonemon
Cave Dweller
Member since January 2017
Posts: 1,024
|
Post by stonemon on May 13, 2021 10:03:13 GMT -5
Welcome to the forum!
|
|
|
Post by manofglass on May 13, 2021 11:19:07 GMT -5
I got a new CR2 double tumbler and one of the rollers isn't turning smoothly, it making my barrels vibrate up and down a little bit. One roller is OK but don't know is if it's bent very slightly or the bearings at one end is out . But I'm newish to tumbling only been doing it with a single barrel machine and decided to get a double barrel one. I just don't no how much movement machines can take I want my machine to last and don't want to end up with a problem later down the line .I wonder if I should send it back as I can. Iv phoned suppliers he says there nothing to worry about as it's guaranteed for a year . But don't know if he's just saying that then bearings go and he says it's wear and tear. Please could someone give me advice ,as I don't have the money to waste I had to use my savings to buy this Return the thing for a refund don’t mess with crap buy something that works
|
|
|
Post by As I in does tries! on May 19, 2021 16:01:53 GMT -5
Greetings and welcome from Scotland, I take it you mean an "Evans CR2" which is a UK made tumbler 240v/50hz. Evans CR2 Tumbler cleaning
|
|