|
Post by akansan on Oct 26, 2007 18:03:45 GMT -5
This is some of Jamie's material I picked up while we were down at WWR. I found it while packing and just had to cab it. Love this stuff! I managed to mix my last wire order up a bit (got half-hard square and dead soft 1/2 round), so these are a bit less fluid than my regular ones. Front - it's leaning back a bit in the shot, making the wrap look a bit off balanced. I'll try for another shot later. Back - you can tell where I fought with the wire on this one, especially on the side. The kink isn't noticeable from the front, but it is from the back.
|
|
|
Post by invisibleuser on Oct 27, 2007 8:45:14 GMT -5
Nice piece of work. I really like that "petro" look.
Steve
|
|
nancyf
has rocks in the head
Wired Cowgirl
Member since April 2007
Posts: 629
|
Post by nancyf on Oct 27, 2007 9:38:36 GMT -5
But....look at those great crisp bends on the wire holding the cab! That is what half hard will give you. A good way to manipulate hh wire, is to use a dowel...that way you won't get the "crimpies" and saves on the "pinkies". Tumbling is a great way to shine it up too...and the cab will polish up on the back also. It suprised the heck out of me when I took the first one out of the tumbler...shine everywhere! yea! Yeppers, I love Jaime's cabs. (colorful)
|
|
|
Post by larrywyland3 on Oct 27, 2007 20:25:34 GMT -5
Wow that is a nice one. Great job on the wrap and a nice shape on the cab.
|
|