For Sale - Highland Park Cab/Saw Combo Model b-12
Jan 12, 2024 13:47:39 GMT -5
QuailRiver, jasoninsd, and 1 more like this
Post by Peruano on Jan 12, 2024 13:47:39 GMT -5
For Sale – Vintage Highland Park Combo Machine $500
10” saw and multi-wheel cabachon polishing machine – Model B 12
This machine was received after it had been completely disassembled for cleaning and prepared for painting. This is a project requiring assembly; it would have had to be disassembled install polishing wheels and to move it anyway. I have positioned components to facilitate picturing the machine and to illustrate all components.
The machine has separate motors and relay controls for the 10” trim saw (with vice) and the cab machine. Motors are in enclosed cabinet which has additional storage. It will require all polishing wheels to be replaced. A new bearing/arbor is furnished for the saw. Also provided are two aluminum polishing discs and the appropriate hood for them to be mounted on the right end of the machine. Bearings of main shaft appear to be good but have not been tested beyond being rolled by hand. Paint in aerosol cans (original HP colors) is included.
I use a nearly identical machine in my workshop daily, and will demonstrate it to you upon request; I have 3 wheels in the main part of the arbor shaft and two more (one on each end) for a total of 5 wheels in addition to the saw.
$500 or ??
Local pickup in Albuquerque, NM only. Questions or requests for more photos should be via PM to peruano here at RTH or rababikes@cs.com
10” saw and multi-wheel cabachon polishing machine – Model B 12
This machine was received after it had been completely disassembled for cleaning and prepared for painting. This is a project requiring assembly; it would have had to be disassembled install polishing wheels and to move it anyway. I have positioned components to facilitate picturing the machine and to illustrate all components.
The machine has separate motors and relay controls for the 10” trim saw (with vice) and the cab machine. Motors are in enclosed cabinet which has additional storage. It will require all polishing wheels to be replaced. A new bearing/arbor is furnished for the saw. Also provided are two aluminum polishing discs and the appropriate hood for them to be mounted on the right end of the machine. Bearings of main shaft appear to be good but have not been tested beyond being rolled by hand. Paint in aerosol cans (original HP colors) is included.
I use a nearly identical machine in my workshop daily, and will demonstrate it to you upon request; I have 3 wheels in the main part of the arbor shaft and two more (one on each end) for a total of 5 wheels in addition to the saw.
$500 or ??
Local pickup in Albuquerque, NM only. Questions or requests for more photos should be via PM to peruano here at RTH or rababikes@cs.com
