garock
fully equipped rock polisher
Member since February 2006
Posts: 1,168
|
Post by garock on Dec 2, 2007 7:57:34 GMT -5
I am looking for an instruction manual or booklet for an Inland cabbing/saw machine. The Model # is B 12. I would greatly appreciate any information anyone would have. Take Care!!
Still digging in the Very Dry Georgia Dirt, GaRock (Frank)
|
|
|
Post by johnjsgems on Dec 4, 2007 0:12:45 GMT -5
I contacted the sales manager for Inland. He says they never made a B12 but thinks Glastar did or does.
|
|
garock
fully equipped rock polisher
Member since February 2006
Posts: 1,168
|
Post by garock on Dec 4, 2007 17:30:58 GMT -5
Mr. johnjsgems: Thank you for your replay. I got this information straight off of the nameplate of the machine. It also has a sn #. I did not copy this down. This machine belongs to a lapidary friend over in Roswell, GA. I will get back with him and see if there is any other information. I will also have him check to see if Glastar appears any where on the machine. Again Thank You for the information.
Still Digging in the Very Dry Georgia Dirt, Frank (GaRock)
|
|