thewiz
has rocks in the head
"What good is money if you don't spend it"
Member since January 2004
Posts: 735
|
Post by thewiz on Jan 26, 2004 8:12:59 GMT -5
if you have one of these could you give me the info off the fasco sticker model # rpms hp
|
|
thewiz
has rocks in the head
"What good is money if you don't spend it"
Member since January 2004
Posts: 735
|
Post by thewiz on Jan 26, 2004 12:30:17 GMT -5
trying to get price from motor dealer for my four barrel tumbler i'm building know it's a fasco motor just need model #
|
|
thewiz
has rocks in the head
"What good is money if you don't spend it"
Member since January 2004
Posts: 735
|
Post by thewiz on Jan 27, 2004 16:53:59 GMT -5
nobody has a lortone qt6 qt66 or qt12 out there know its 1550 rpms beleive its a 1/2 shaft or 5/16 and not shore on hp but think 1/4 should do
|
|
Pdwight
has rocks in the head
Member since June 2003
Posts: 619
|
Post by Pdwight on Jan 28, 2004 0:38:43 GMT -5
Hang on
I have a brand new one on the way, when it get here I will post the info. Are you trying to get the motor from Granger ?? what about the pulley for the shaft ??
Usually 60C motors come out to 1750 RPM
Dwight P
|
|
thewiz
has rocks in the head
"What good is money if you don't spend it"
Member since January 2004
Posts: 735
|
Post by thewiz on Jan 28, 2004 9:26:19 GMT -5
you the man "or woman" haha trying for awhile now to get this info.didn't think to post here . rpms i can controll with the pulleys to get proper barrel speed. but getting different findings on hp. lortone on some are coming back 1/3 hp to 1/50 hp. which is a cost per day to run of 89 cents for 1/3 to 5 cents for 1/50. will try grainger or fasco motors. let the internet work for me on that worst case will just buy a 33b or motor and pulleys from one of the rock shops. My eight year old son can't get enough rocks with just the 45c i have now,and building one with him will be worth the extra money spent
|
|
Trylobyte
starting to spend too much on rocks
Member since October 2003
Posts: 101
|
Post by Trylobyte on Jan 28, 2004 18:22:15 GMT -5
Interestingly enough, I have a QT12 motor with just a few loads on it. I replaced it with a motor from a Thumlers Model B because the model B motor turns slower. They're both Fascos, but there are a couple of differences between the two, one being the RPM, the other being the location of the oil ports. The part numbers are almost the same, but not quite.
Email me and I'll make you a deal on it...
|
|
thewiz
has rocks in the head
"What good is money if you don't spend it"
Member since January 2004
Posts: 735
|
Post by thewiz on Jan 28, 2004 18:39:12 GMT -5
you have to unblock your email for me to send you one but i did try an IM
|
|
Pdwight
has rocks in the head
Member since June 2003
Posts: 619
|
Post by Pdwight on Jan 31, 2004 1:17:59 GMT -5
|
|
thewiz
has rocks in the head
"What good is money if you don't spend it"
Member since January 2004
Posts: 735
|
Post by thewiz on Jan 31, 2004 12:19:51 GMT -5
Pdwight thank you for getting me that info. u63b1 seems to be just the frame number not the model number . again thank you
|
|
Pdwight
has rocks in the head
Member since June 2003
Posts: 619
|
Post by Pdwight on Jan 31, 2004 12:54:59 GMT -5
How about 71639327
That is the othere number on mine
Dwight P
|
|
thewiz
has rocks in the head
"What good is money if you don't spend it"
Member since January 2004
Posts: 735
|
Post by thewiz on Feb 1, 2004 14:59:17 GMT -5
Thanks to all for your help
Patrick
|
|