ryjen
starting to shine!
Member since October 2009
Posts: 49
|
Post by ryjen on Oct 30, 2011 18:52:58 GMT -5
hey guys i have an old 33b that i bought used, when i got it i plugged in it and it worked fine, but when i got it home it hums and barely turns at 1 rpm. any suggestions?
|
|
blessed
spending too much on rocks
Member since January 2010
Posts: 329
|
Post by blessed on Oct 30, 2011 19:18:18 GMT -5
Several things to try: different receptal, loosen belt and see if motor will run at normal speed,make sure rollers role easy, not getting a good conection or a bad cord. Are there any play in the motor? Let us know if any of these help. James
|
|
ryjen
starting to shine!
Member since October 2009
Posts: 49
|
Post by ryjen on Oct 30, 2011 21:06:22 GMT -5
i have checked the belt and different wall plug i will check the others and let you know, thanks
|
|
|
Post by catmandewe on Oct 30, 2011 21:14:02 GMT -5
Get some 12/34 and spray down the inside of the motor, let it dry and then plug it in. If it is something in the motor it will recondition it. The stuff works wonders. www.armitelabs.com/1234.htmlTony
|
|
ryjen
starting to shine!
Member since October 2009
Posts: 49
|
Post by ryjen on Nov 6, 2011 14:05:48 GMT -5
thanks for the suggestions. I had a mechanically inclined friend take a look at it and it just needed some tlc and cleaning and now it purrrs perfectly thanks mike.\
Ryan
|
|