herchenx
Cave Dweller
Member since January 2012
Posts: 3,360
|
Post by herchenx on Feb 18, 2012 21:14:34 GMT -5
So I am checking every few days now and the rotary tumbler is producing a steady stream of smooth rock. I'm posting this on my phone so I will just show all the photos in order after I type in. I started this batch last Sunday and have picked out and added once or twice this week. I didn't want to waste the not-yet-fully used slurry, so I pulled all the rocks out of both barrels, shook off as much slurry as I could into the barrel, then rinsed the rock, and pulled out all the ready and very close rock. The rock that was ready (only a few pieces) I put in a tupperware with water. I set quite a few that were nearly done but that I felt I could get to 100% on the grinder, there were Lot of those. I was able to fit the remaining content from both barrels into a single barrel, then I took some brecciated jasper and pet wood from wampidy, some az rainbow pet wood from stonesthatrock that I chiseled up, some wonderstone I got from nmonyx, and a bunch of scrap I got from an ebayer, put it in the slurry of the second barrel & added a little sic to both and set them tumbling. ![](http://daharsh.net/rock/tm.jpg)
|
|
|
Post by Drummond Island Rocks on Feb 18, 2012 21:21:55 GMT -5
Thats a great batch of rocks in the strainer. Sounds like you have gotten a great assortment of rocks. The slurry looks very thick. I dont think any of ours has gotten that thick yet but maybe thats why our 60/90 takes 4-5 weeks each time so far. Chuck
|
|
herchenx
Cave Dweller
Member since January 2012
Posts: 3,360
|
Post by herchenx on Feb 18, 2012 21:43:42 GMT -5
Some of these have been tumbling for over 6 weeks. The dry ones are the ones I am going through on the grinder because they are so close and I want to keep as much of the color and features as I can.
The slurry comes from constantly adding new rock I think. I keep pulling any that are ready out and adding new ones in.
|
|
|
Post by Jugglerguy on Feb 18, 2012 21:46:26 GMT -5
Wow, there are some really cool rocks there. I like the green one on the right in the fifth picture. There's no pattern, but I really like the color.
|
|
herchenx
Cave Dweller
Member since January 2012
Posts: 3,360
|
Post by herchenx on Feb 18, 2012 22:16:05 GMT -5
If you mean the lower right green one I think I don't know what it is. The upper right one is epidote from here in Colorado from some rockhounding earlier this year.
|
|
hulagrub
spending too much on rocks
![*](//storage.proboards.com/forum/images/stars/star_teal.png)
Member since October 2009
Posts: 256
|
Post by hulagrub on Feb 19, 2012 20:11:35 GMT -5
Cool John!
|
|
|
Post by helens on Feb 19, 2012 20:54:31 GMT -5
So the question that will help everyone is... what did you do DIFFERENTLY this time than you did before that stopped the pitting and cracking:)?
|
|
herchenx
Cave Dweller
Member since January 2012
Posts: 3,360
|
Post by herchenx on Feb 19, 2012 21:35:21 GMT -5
I am pulling then out and grinding them. Many of these are ones that have been pitting the whole time and I wanted to save them on the grinder.
|
|