jason12x12
freely admits to licking rocks
Member since October 2011
Posts: 798
|
Post by jason12x12 on Sept 2, 2012 20:04:39 GMT -5
little later with this than i wanted to be... but here it is Chad sent me a saw body and a couple weeks ago I got it goin these are the blades i bought not sure how good they are seems the cheapy ebay are better but it may break in also it wants to spit water out the back end where the table meets the body.. saw table that is ..any help there is appreciated thanks again Chad
|
|
|
Post by helens on Sept 3, 2012 3:01:40 GMT -5
Chad doesn't post here anymore Jason:(.
|
|
|
Post by FrogAndBearCreations on Sept 3, 2012 9:35:56 GMT -5
if your saw deck comes off of the tank you can make a gasket from cork or regular sheet gasket material to fit between them and that will stop the leaking
|
|
keystonecops
freely admits to licking rocks
Member since October 2010
Posts: 957
|
Post by keystonecops on Sept 3, 2012 10:49:10 GMT -5
I like the splas guard. That there is yankee ingenuity. Later Clyde
|
|
jason12x12
freely admits to licking rocks
Member since October 2011
Posts: 798
|
Post by jason12x12 on Sept 3, 2012 11:52:00 GMT -5
i saw he was a guest now ...bummer ...so a cork gasket. I will give it a go
|
|