GeorgeStoneStore
starting to spend too much on rocks
Member since November 2011
Posts: 168
|
Post by GeorgeStoneStore on Feb 24, 2013 5:23:56 GMT -5
hello everyone. Some Hungarian idea : asvanyokcsiszolasa.blogspot.huThis site is mine. can you recommend me similar sites ? Thanks for your help best wishes, George
|
|
|
Post by Peruano on Feb 24, 2013 9:06:02 GMT -5
George, I checked it out but will need to go back much more slowly. My Hungarian is not very good so I'm concentrating on the pictures (excellent and exhaustive photos of the various machines). Thanks and don't hesitate to read the hundreds of pages here on homemade and lapidary equipment. Thanks for the contact. Tom
|
|
itsandbits
freely admits to licking rocks
Member since March 2012
Posts: 825
|
Post by itsandbits on Feb 24, 2013 11:28:09 GMT -5
very nice job on the grinder saw George. the vice looks good. A new use for good tool. I used the translater and could read most of it.
|
|
GeorgeStoneStore
starting to spend too much on rocks
Member since November 2011
Posts: 168
|
Post by GeorgeStoneStore on Feb 24, 2013 12:58:22 GMT -5
Thank you very much. I many machine made the near future, and share I with everyone who might be interested. I would like to publish here... Unfortunately, I hardly go to the English. but the translator can be a solution... and many many picture, ... understand the images all over the world and any language
|
|
jamesp
Cave Dweller
Member since October 2012
Posts: 36,159
|
Post by jamesp on Feb 24, 2013 19:42:35 GMT -5
Very good engineer ssb
|
|
quartz
Cave Dweller
breakin' rocks in the hot sun
Member since February 2010
Posts: 3,341
|
Post by quartz on Feb 25, 2013 0:14:13 GMT -5
Very nice work, well thought out. My compliments. Keep them coming.
|
|
garock
fully equipped rock polisher
Member since February 2006
Posts: 1,168
|
Post by garock on Feb 25, 2013 17:23:13 GMT -5
Are the motors three phase ? Are you using an inverter drive which uses 220 single phase and the output of the controller is 3 phase ? And is the drive controller varible speed ? Just wondering !!
|
|
GeorgeStoneStore
starting to spend too much on rocks
Member since November 2011
Posts: 168
|
Post by GeorgeStoneStore on Feb 26, 2013 2:21:06 GMT -5
|
|
Rockygibraltar
fully equipped rock polisher
Member since February 2006
Posts: 1,404
|
Post by Rockygibraltar on Feb 28, 2013 4:29:27 GMT -5
Very nice machines!
|
|
|
Post by rocklicker on Mar 1, 2013 19:58:59 GMT -5
Great job. Very professional work there. Good idea with the saw clamp and feed. Steve
|
|
GeorgeStoneStore
starting to spend too much on rocks
Member since November 2011
Posts: 168
|
Post by GeorgeStoneStore on Mar 2, 2013 6:49:29 GMT -5
thank you for all responds, I'm glad if you like machines. New machines coming soon...
|
|