edg
off to a rocking start
Member since July 2022
Posts: 3
|
Post by edg on Jul 10, 2022 20:37:54 GMT -5
Need help trying to refurb a Diamond Pacific TC-10 Saw. Parts seem to be non-existent. I have been unable to find a parts diagram. Any leads will be helpful. Thanks
|
|
|
Post by hummingbirdstones on Jul 10, 2022 21:33:30 GMT -5
Welcome to the forum! I'm tagging catmandewe for you. He's a DP dealer and may know if there are parts available.
|
|
|
Post by catmandewe on Jul 11, 2022 13:35:33 GMT -5
Thanks Robin. edg the tc10 has been discontinued but there are parts still available for it. Do you know which part you need? Tony
|
|
edg
off to a rocking start
Member since July 2022
Posts: 3
|
Post by edg on Jul 11, 2022 16:08:41 GMT -5
Tony, I am a shop steward at East Texas Gem & Mineral Society-ETGMS. Someone donated the DP TC-10 and i am trying to place it in service in the club workshop. I know it is missing the gasket between the saw platform and oil well. Something is missing with the carriage drive. I have been unable to find an schematic/ parts list for this saw. Please direct me to a website to find this information. Thank you!
|
|
|
Post by jasoninsd on Jul 11, 2022 17:49:58 GMT -5
Tony, I am a shop steward at East Texas Gem & Mineral Society-ETGMS. Someone donated the DP TC-10 and i am trying to place it in service in the club workshop. I know it is missing the gasket between the saw platform and oil well. Something is missing with the carriage drive. I have been unable to find an schematic/ parts list for this saw. Please direct me to a website to find this information. Thank you!
Just tagging Tony ( catmandewe ) for you so he sees this... Edit: Welcome to the forum from South Dakota!
|
|
|
Post by catmandewe on Jul 11, 2022 18:52:46 GMT -5
I put in a call to Don to see if I can get you copies of the owners manuals. He is out of town until Wednesday. They have pdf's for the ones that are still in production but the discontinued ones do not.
Tony
|
|
edg
off to a rocking start
Member since July 2022
Posts: 3
|
Post by edg on Jul 12, 2022 14:35:16 GMT -5
Thank you! No rush...it is too hot to work after 10:00AM in the morning. Plus we are on an energy crunch because of lack of wind to power the wind turbines in West Texas.
|
|