jwd
off to a rocking start
Member since July 2022
Posts: 2
|
Post by jwd on Jul 18, 2022 10:15:25 GMT -5
|
|
|
Post by Peruano on Jul 18, 2022 11:48:18 GMT -5
I too contemplated how to make something, like you have, work in a lapidary context. It seems that it would be possible to incorporate one wheel and or a flat polishing disk on the shaft that you have. What might be more problematic is configuring a longer shaft (bearings to support midway and or at the far end, etc.). Your considerations of water and electrical risks are important as well. I'm sure someone will have stronger opinions and more sophisticated guidance for you. Please keep us informed. BTW cab machines by themselves are not that expensive (used), its only when you have to buy/replace wheels (especially if you use diamond) that the real expense grows. The minimal configuration would be a two wheel arbor, with one or two expando wheels that could give considerable flexibility with sic or diamond belts. I have plenty of silicon carbide wheels to give away, but the shipping and their suitability in a modern context are major considerations.
|
|